Volumetric Infusion Pump
Model : GPVI108

Volumetric Infusion Pump

Product Specification

Application Hospital, Clinical Purpose
• Model BYS-820
• Brand Beyond
• Minimum Order Quantity 1 Unit

Specification of Infusion Pump

•Rate 1ml/h ~ 1,200ml/h
•Flow Rate Accuracy Within ±5% (after correct calibration)
•Mechanical precision Within ±2%
•Purge Rate 100ml/h ~ 1,000ml/h (100 ml/h step)
• Infusion Volume 1ml ~ 9999ml
•Total Infusion Volume 0.1ml ~ 9999.9ml
•KVO rate 1ml/h ~ 5 ml/h (1ml/h step)
•Occlusion High: 800mmHg ±200mmHg (106.7kPa±26.7kPa
•Medium: 500mmHg ±100mmHg(66.7kPa±13.3kPa
•Low: 300mmHg ±100mmHg (40.7kPa±13.3kPa )
•Unique audible and visible alarm
•Human voice alarm for End of injection, occlusion, door open,
•bubbles in the tube, wrong setting, low battery, AC power pulled out etc.
•Power Source AC 100V ~ 240V, 50/60Hz; Internal rechargeable Li battery, capacity≥1,600mAh, 4 hours internal battery backup
•Bubble detector Ultrasonic wave detector; detection sensitivity ≥25μL
•Fuse F1AL/250V, 2 pc inside
•Power Consumption 18VA
•Operating Condition Ambient temperature: +5℃ ~ +40℃;
•Relative humidity: 20 ~ 90% Atmospheric pressure: 86.0kpa ~ 106.0kpa
•Transport & Storage
•Condition Ambient temperature:-30℃ ~ +55℃ Relative humidity: ≤95%
•Equipment Classification Class II, internal power supply, Type CF
•IP Classification IPX4
•Dimension 140mm (L) ×157mm(W) ×220mm(H)
•Weight 1.8kg (net weight)